Glance with Docker Compose

What Glance needs

Only figures Glance's own documentation publishes, each linked to the page it is on. Where the project gives no number, this page does not invent one.

On top of this, Caddy (the reverse proxy in the file) is a single small container.

Which hardware Glance has images for

Read from each image's manifest list in its registry (anonymous, read-only) when this page was built. An app counts for a CPU only if every one of its images lists it.

• x86-64 PC or NAS (linux/amd64): every image has a build.
• Raspberry Pi 4/5, 64-bit OS (linux/arm64): every image has a build.
• Raspberry Pi 3 or Zero 2 W, 32-bit OS (linux/arm/v7): every image has a build.

A manifest says an image exists for a CPU, not how well Glance runs on it: a build for arm64 or arm/v7 can still be too slow or need more memory than the board has. The RAM and disk Glance publishes are in the table above and, for a whole set of apps against a Raspberry Pi, on Will it run on my machine?. A tag like latest can move to a new digest after the date checked.

docker-compose.yml

This is exactly what the builder writes for Glance alone on example.org: the official definition with its published ports removed and Caddy added in front.

# docker-compose.yml built at dankhost.com for: Glance
# Each app block is its official compose definition. Only the names were prefixed with
# the app slug (services, containers, volumes, bind folders, .env variables) so any set of
# apps can share one file; other differences are listed under "Changed:" in each block.
# Only Caddy publishes ports. Secrets live in .env next to this file.

services:
  # ---- Caddy: the one reverse proxy, HTTPS certificates from Let's Encrypt ----
  # Source: https://caddyserver.com/docs/running (checked 2026-09-23)
  # Source: https://github.com/dani-garcia/vaultwarden/wiki/Using-Docker-Compose (checked 2026-09-23)
  # Caddyfile goes in ./caddy/Caddyfile. Fixed address 172.30.0.2 so apps can trust it exactly.
  caddy:
    image: "caddy:2"
    container_name: "caddy"
    restart: "unless-stopped"
    ports:
      - "80:80"
      - "443:443"
      - "443:443/udp"
    volumes:
      - "./caddy:/etc/caddy"
      - "caddy-data:/data"
      - "caddy-config:/config"
    networks:
      proxy:
        ipv4_address: "172.30.0.2"

  # ---- Glance (glance.example.org) ----
  # Source: https://github.com/glanceapp/glance/blob/main/README.md (checked 2026-10-01)
  # Source: https://github.com/glanceapp/glance/blob/main/docs/configuration.md (checked 2026-10-01)
  # Changed: Removed the documented '8080:8080' port and container_name; Caddy reaches glance:8080 on the proxy network.
  glance:
    image: "glanceapp/glance"
    container_name: "glance"
    restart: "unless-stopped"
    volumes:
      - "./glance/config:/app/config"
    networks:
      proxy: {}

networks:
  # Pinned so the trusted-proxy address given to each app (172.30.0.2) is exact.
  # If "docker compose up" reports "Pool overlaps", change 172.30.0 here, in Caddy's
  # ipv4_address and in every trusted-proxy value to a free 172.x.0 range.
  proxy:
    ipam:
      config:
        - subnet: "172.30.0.0/24"
          ip_range: "172.30.0.128/25"
          gateway: "172.30.0.1"

volumes:
  caddy-data:
  caddy-config:

Caddyfile save as caddy/Caddyfile

Caddy gets and renews the HTTPS certificate for glance.example.org by itself once the DNS record points at your server and ports 80 and 443 reach it.

# Caddyfile built at dankhost.com. Save it as ./caddy/Caddyfile next to docker-compose.yml.
# Caddy gets and renews a Let's Encrypt certificate for each name below by itself,
# once the DNS records point at this server and ports 80 and 443 reach it.

# Glance
glance.example.org {
	reverse_proxy glance:8080
}

Already running nginx, Nginx Proxy Manager, Caddy or Traefik? The reverse-proxy settings Glance needs, for all four, each cited to Glance's own docs.

.env

Glance needs no secret here; the builder adds nothing you have to fill in by hand.

# .env for Glance, from dankhost.com/app/glance/. Nothing here is secret.
# Keep this file private (chmod 600).
# None of the chosen apps needs a variable here.

Changes from the official file

Besides prefixing every service, container, volume, folder and variable with glance (so any set of apps can share one file), these are all the differences from what the project documents:

• Removed the documented '8080:8080' port and container_name; Caddy reaches glance:8080 on the proxy network.

Notes for Glance behind the proxy

• Before the first start, put a glance.yml into ./glance/config: the README gives a wget command for the example file, docs/glance.yml in the Glance repository. Without a config file Glance does not start.
• Glance has no login until you add one: the configuration docs' auth block (a secret-key made with glance secret:make, and users with a password or a password-hash) goes at the top level of glance.yml.
• Also set proxied: true under server: in glance.yml. Glance blocks an address after 5 failed logins in 5 minutes, and behind a proxy it needs X-Forwarded-For to see the visitor's address rather than the proxy's.
• The README's image has no tag, which is 'latest'.

Back it up

Glance publishes no backup procedure. It keeps no database: the whole dashboard is the files in ./config.

Below is the BACKUP.md the builder writes next to the compose file above: which of its folders and volumes hold data, what to copy with which container stopped, and a restore check. Pick more apps in the builder and it covers them all in one file.

# BACKUP.md built at dankhost.com for: Glance

What to copy from the docker-compose.yml built with this file, the database dump each project documents (rewritten for the service names in that file), what to copy with which container stopped, and how to check the result. Run every command in the folder that holds docker-compose.yml.

The folders are owned by the containers' users: put sudo in front of tar if it says "Permission denied". Named volumes live under /var/lib/docker/volumes, not next to the compose file, so they are copied through a throwaway ubuntu container (Docker's documented --volumes-from method). tar makes a full copy each run; for large folders an incremental tool (restic, borg, rsync) saves time and space.

Never run "docker compose down -v" on this file: it deletes the named volumes of every app in it.

## Before you start

    BACKUP=/mnt/backup/selfhost   # change this: a disk or machine other than this server's system disk
    mkdir -p "$BACKUP"

## Every time: the three stack files

    tar czf "$BACKUP/stack-files.tar.gz" docker-compose.yml .env caddy

.env holds the database passwords and secret keys the apps were set up with; keep this archive as private as the data.

## Caddy (the reverse proxy)

Caddy's docs: 'The data directory must not be treated as a cache.' It holds the TLS certificates and their private keys; without it Caddy has to ask Let's Encrypt for every certificate again.

- caddy-data (named volume, /data in caddy)
  BACK UP: TLS certificates, private keys, OCSP staples.
- caddy-config (named volume, /config in caddy)
  SKIP: the last active configuration, kept for 'caddy run --resume', which this setup does not use: it starts from the Caddyfile.
- ./caddy (/etc/caddy in caddy)
  IN stack-files.tar.gz: the Caddyfile, copied with the stack files above.

Copy (Caddy keeps serving while you copy):

    docker run --rm --volumes-from caddy -v "$BACKUP":/backup ubuntu tar cvf /backup/caddy-data.tar /data

Restore check:

    tar tf "$BACKUP/caddy-data.tar" > /dev/null && echo OK
    docker run --rm --volumes-from caddy -v "$BACKUP":/backup ubuntu bash -c "cd /data && tar xvf /backup/caddy-data.tar --strip 1"

Sources:
- Caddy docs: Conventions, Data directory: https://caddyserver.com/docs/conventions#data-directory (checked 2026-09-24)
- Docker docs: Volumes, Back up, restore, or migrate data volumes: https://docs.docker.com/engine/storage/volumes/#back-up-restore-or-migrate-data-volumes (checked 2026-09-24)

## Glance

Glance publishes no backup procedure. It keeps no database: the whole dashboard is the files in ./config.

What this compose mounts:
- ./glance/config (/app/config in glance)
  BACK UP: glance.yml and any files it includes (pages, custom CSS).

1. Copy (Glance keeps running):
   Glance only reads these files, so copying them while it runs is safe.

    tar czf "$BACKUP/glance-config.tar.gz" ./glance/config

Restore check:

    tar tzf "$BACKUP/glance-config.tar.gz" > /dev/null && echo OK

Put a copy back (with Glance stopped):

    tar xzf "$BACKUP/glance-config.tar.gz"   # recreates ./glance/config; move the old folder aside first

Put ./glance/config back and run docker compose up -d.

Sources:
- Glance README: Installation, Docker compose manual: https://github.com/glanceapp/glance/blob/main/README.md (checked 2026-10-01)
- Docker docs: Volumes, Back up, restore, or migrate data volumes: https://docs.docker.com/engine/storage/volumes/#back-up-restore-or-migrate-data-volumes (checked 2026-10-01)

Update it

What docker compose pull does depends only on how each image line in the compose file above is tagged. For Glance as this page writes it:

What Glance's docs say about updating

Glance publishes no update procedure for this setup; the steps below are Docker's generic method.

The steps

1. Back up first, as in Back it up above. An update can migrate Glance's data on its first start; the copy is the way back.
2. Download the new images. Running containers are not touched yet:

   docker compose pull

3. Recreate the containers whose image changed. Volumes and bind-mounted folders stay as they are:

   docker compose up -d

4. Watch Glance start (Ctrl+C stops following the log, not the app):

   docker compose logs -f glance

5. Optional: remove the old images the pull left without a tag. This covers every stack on the machine, not only this one:

   docker image prune

Docker's reference for these commands: Docker docs: docker compose pull checked 2026-09-30; Docker docs: docker compose up (recreates changed containers, keeps volumes) checked 2026-09-30; Docker docs: docker image prune checked 2026-09-30

Sources

Every page below was fetched on the date shown.

• Glance on GitHub (repository description) checked 2026-10-01 (what it does)
• Glance README: Installation, Docker compose manual checked 2026-10-01 (compose definition and proxy settings, backup plan)
• Glance docs: Configuration (authentication, server proxied, environment variables) checked 2026-10-01 (compose definition and proxy settings)
• Caddy docs: Keep Caddy running (Docker Compose section) checked 2026-09-23 (Caddy)
• Vaultwarden wiki: Caddy with HTTP challenge (uses the caddy:2 image) checked 2026-09-23 (Caddy)
• Docker docs: Volumes, Back up, restore, or migrate data volumes checked 2026-10-01 (backup plan)
• Caddy docs: Conventions, Data directory checked 2026-09-24 (backup plan)
• Docker docs: docker compose pull checked 2026-09-30 (update steps)
• Docker docs: docker compose up (recreates changed containers, keeps volumes) checked 2026-09-30 (update steps)
• Docker docs: docker image prune checked 2026-09-30 (update steps)

Add Glance to the builder All seventy apps