FreshRSS with Docker Compose
FreshRSS is a self-hosted RSS feed aggregator. It is lightweight, easy to work with, powerful, customizable, and a multi-user application with an anonymous reading mode. In the project's words: FreshRSS README checked 2026-09-23
Add FreshRSS to the builder to use your own domain and combine it with other apps in one file.
What FreshRSS needs
Only figures FreshRSS's own documentation publishes, each linked to the page it is on. Where the project gives no number, this page does not invent one.
| Resource | Minimum | Recommended |
|---|---|---|
| RAM | Not published by the project | |
| CPU | Not published by the project | |
| No figure; the README asks for a "light server" and says it even works on a Raspberry Pi 1 with response times under a second (tested with 150 feeds and 22k articles). Source: FreshRSS README (Requirements) checked 2026-09-23 | ||
| Disk | Not published by the project | |
docker-compose.yml
This is exactly what the builder writes for FreshRSS alone on example.org: the official definition with its published ports removed and Caddy added in front. The time zone is Etc/UTC here; the builder uses your browser's.
# docker-compose.yml built at dankhost.com for: FreshRSS
# Each app block is its official compose definition. Only the names were prefixed with
# the app slug (services, containers, volumes, bind folders, .env variables) so any set of
# apps can share one file; other differences are listed under "Changed:" in each block.
# Only Caddy publishes ports. Secrets live in .env next to this file.
services:
# ---- Caddy: the one reverse proxy, HTTPS certificates from Let's Encrypt ----
# Source: https://caddyserver.com/docs/running (checked 2026-09-23)
# Source: https://github.com/dani-garcia/vaultwarden/wiki/Using-Docker-Compose (checked 2026-09-23)
# Caddyfile goes in ./caddy/Caddyfile. Fixed address 172.30.0.2 so apps can trust it exactly.
caddy:
image: "caddy:2"
container_name: "caddy"
restart: "unless-stopped"
ports:
- "80:80"
- "443:443"
- "443:443/udp"
volumes:
- "./caddy:/etc/caddy"
- "caddy-data:/data"
- "caddy-config:/config"
networks:
proxy:
ipv4_address: "172.30.0.2"
# ---- FreshRSS (rss.example.org) ----
# Source: https://github.com/FreshRSS/FreshRSS/blob/edge/Docker/freshrss/docker-compose.yml (checked 2026-09-23)
# Source: https://github.com/FreshRSS/FreshRSS/tree/edge/Docker (checked 2026-09-23)
# Changed: TRUSTED_PROXY is narrowed from the documented '172.16.0.1/12 192.168.0.1/16' to Caddy's fixed address; TZ is your browser's time zone instead of the example Europe/Paris.
# Uses the documented default SQLite database (the Postgres variant is an optional add-on file).
freshrss:
image: "freshrss/freshrss:latest"
container_name: "freshrss"
hostname: "freshrss"
restart: "unless-stopped"
logging:
options:
max-size: "10m"
volumes:
- "freshrss-data:/var/www/FreshRSS/data"
- "freshrss-extensions:/var/www/FreshRSS/extensions"
environment:
TZ: "Etc/UTC"
CRON_MIN: "3,33"
TRUSTED_PROXY: "172.30.0.2"
networks:
proxy: {}
networks:
# Pinned so the trusted-proxy address given to each app (172.30.0.2) is exact.
# If "docker compose up" reports "Pool overlaps", change 172.30.0 here, in Caddy's
# ipv4_address and in every trusted-proxy value to a free 172.x.0 range.
proxy:
ipam:
config:
- subnet: "172.30.0.0/24"
ip_range: "172.30.0.128/25"
gateway: "172.30.0.1"
volumes:
caddy-data:
caddy-config:
freshrss-data:
freshrss-extensions:
Caddyfile save as caddy/Caddyfile
Caddy gets and renews the HTTPS certificate for rss.example.org by itself once the DNS record points at your server and ports 80 and 443 reach it.
# Caddyfile built at dankhost.com. Save it as ./caddy/Caddyfile next to docker-compose.yml.
# Caddy gets and renews a Let's Encrypt certificate for each name below by itself,
# once the DNS records point at this server and ports 80 and 443 reach it.
# FreshRSS
rss.example.org {
reverse_proxy freshrss:80
}
.env
FreshRSS needs no secret here; the builder adds nothing you have to fill in by hand.
# .env for FreshRSS, from dankhost.com/app/freshrss/. Nothing here is secret. # Keep this file private (chmod 600). # None of the chosen apps needs a variable here.
Changes from the official file
Besides prefixing every service, container, volume, folder and variable with freshrss (so any set of apps can share one file), these are all the differences from what the project documents:
- TRUSTED_PROXY is narrowed from the documented '172.16.0.1/12 192.168.0.1/16' to Caddy's fixed address; TZ is your browser's time zone instead of the example Europe/Paris.
- Uses the documented default SQLite database (the Postgres variant is an optional add-on file).
Notes for FreshRSS behind the proxy
- The web installer runs on first visit and is open to whoever gets there first: open the address straight away, pick SQLite, and set the base URL to https://rss.example.org.
- Feeds refresh at minutes 3 and 33 of every hour (CRON_MIN).
How to run it
- At your DNS provider, add an A record named
rsson your domain pointing at the server's public IP address, and forward TCP 80, TCP 443 and UDP 443 to it. - Save the three files in one folder:
docker-compose.ymland.envside by side, the Caddyfile at./caddy/Caddyfile. Replaceexample.orgwith your domain in the Caddyfile, the compose file and the .env, or let the builder do it. - Nothing in
.envneeds filling in;chmod 600 .envall the same. - Start it:
docker compose up -d docker compose logs -f caddy # watch the certificate arrive
- Open the new address (
rss.plus your domain) in a browser and follow the notes above.
Back it up
FreshRSS's backup page: data/ is required (its cache/ can be skipped, FreshRSS rebuilds it) and extensions/ is recommended if you use third-party extensions. With the default SQLite the database is inside data/, so no separate dump is needed.
Below is the BACKUP.md the builder writes next to the compose file above: which of its folders and volumes hold data, what to copy with which container stopped, and a restore check. Pick more apps in the builder and it covers them all in one file.
# BACKUP.md built at dankhost.com for: FreshRSS
What to copy from the docker-compose.yml built with this file, the database dump each project documents (rewritten for the service names in that file), what to copy with which container stopped, and how to check the result. Run every command in the folder that holds docker-compose.yml.
The folders are owned by the containers' users: put sudo in front of tar if it says "Permission denied". Named volumes live under /var/lib/docker/volumes, not next to the compose file, so they are copied through a throwaway ubuntu container (Docker's documented --volumes-from method). tar makes a full copy each run; for large folders an incremental tool (restic, borg, rsync) saves time and space.
Never run "docker compose down -v" on this file: it deletes the named volumes of every app in it.
## Before you start
BACKUP=/mnt/backup/selfhost # change this: a disk or machine other than this server's system disk
mkdir -p "$BACKUP"
## Every time: the three stack files
tar czf "$BACKUP/stack-files.tar.gz" docker-compose.yml .env caddy
.env holds the database passwords and secret keys the apps were set up with; keep this archive as private as the data.
## Caddy (the reverse proxy)
Caddy's docs: 'The data directory must not be treated as a cache.' It holds the TLS certificates and their private keys; without it Caddy has to ask Let's Encrypt for every certificate again.
- caddy-data (named volume, /data in caddy)
BACK UP: TLS certificates, private keys, OCSP staples.
- caddy-config (named volume, /config in caddy)
SKIP: the last active configuration, kept for 'caddy run --resume', which this setup does not use: it starts from the Caddyfile.
- ./caddy (/etc/caddy in caddy)
IN stack-files.tar.gz: the Caddyfile, copied with the stack files above.
Copy (Caddy keeps serving while you copy):
docker run --rm --volumes-from caddy -v "$BACKUP":/backup ubuntu tar cvf /backup/caddy-data.tar /data
Restore check:
tar tf "$BACKUP/caddy-data.tar" > /dev/null && echo OK
docker run --rm --volumes-from caddy -v "$BACKUP":/backup ubuntu bash -c "cd /data && tar xvf /backup/caddy-data.tar --strip 1"
Sources:
- Caddy docs: Conventions, Data directory: https://caddyserver.com/docs/conventions#data-directory (checked 2026-09-24)
- Docker docs: Volumes, Back up, restore, or migrate data volumes: https://docs.docker.com/engine/storage/volumes/#back-up-restore-or-migrate-data-volumes (checked 2026-09-24)
## FreshRSS
FreshRSS's backup page: data/ is required (its cache/ can be skipped, FreshRSS rebuilds it) and extensions/ is recommended if you use third-party extensions. With the default SQLite the database is inside data/, so no separate dump is needed.
What this compose mounts:
- freshrss-data (named volume, /var/www/FreshRSS/data in freshrss)
BACK UP: configuration, users and their SQLite databases.
- freshrss-extensions (named volume, /var/www/FreshRSS/extensions in freshrss)
BACK UP: third-party extensions you installed.
1. Stop freshrss. FreshRSS: 'It is safer to stop your web server and cron during maintenance operations'; in this image both run in the one container.
docker compose stop freshrss
2. Copy while freshrss is stopped:
docker run --rm --volumes-from freshrss -v "$BACKUP":/backup ubuntu tar cvf /backup/freshrss-data.tar /var/www/FreshRSS/data
docker run --rm --volumes-from freshrss -v "$BACKUP":/backup ubuntu tar cvf /backup/freshrss-extensions.tar /var/www/FreshRSS/extensions
3. Start it again:
docker compose start freshrss
Restore check:
tar tf "$BACKUP/freshrss-data.tar" > /dev/null && echo OK
tar tf "$BACKUP/freshrss-extensions.tar" > /dev/null && echo OK
Put a copy back (with freshrss stopped):
docker run --rm --volumes-from freshrss -v "$BACKUP":/backup ubuntu bash -c "cd /var/www/FreshRSS/data && tar xvf /backup/freshrss-data.tar --strip 4"
docker run --rm --volumes-from freshrss -v "$BACKUP":/backup ubuntu bash -c "cd /var/www/FreshRSS/extensions && tar xvf /backup/freshrss-extensions.tar --strip 4"
Stop it, restore both volumes with the commands above, start it.
Sources:
- FreshRSS docs: Backup: https://freshrss.github.io/FreshRSS/en/admins/05_Backup.html (checked 2026-09-24)
- Docker docs: Volumes, Back up, restore, or migrate data volumes: https://docs.docker.com/engine/storage/volumes/#back-up-restore-or-migrate-data-volumes (checked 2026-09-24)
Sources
Every page below was fetched on the date shown.
- FreshRSS README checked 2026-09-23 (what it does)
- FreshRSS README (Requirements) checked 2026-09-23 (hardware requirements)
- FreshRSS: Docker/freshrss/docker-compose.yml checked 2026-09-23 (compose definition and proxy settings)
- FreshRSS: Deploy FreshRSS with Docker (TRUSTED_PROXY, CRON_MIN) checked 2026-09-23 (compose definition and proxy settings)
- Caddy docs: Keep Caddy running (Docker Compose section) checked 2026-09-23 (Caddy)
- Vaultwarden wiki: Caddy with HTTP challenge (uses the caddy:2 image) checked 2026-09-23 (Caddy)
- FreshRSS docs: Backup checked 2026-09-24 (backup plan)
- Docker docs: Volumes, Back up, restore, or migrate data volumes checked 2026-09-24 (backup plan)
- Caddy docs: Conventions, Data directory checked 2026-09-24 (backup plan)